Molykote G-1502FM Synthetic Bearing and Gear Grease for your mechanical equipment
Molykote G-1502FM Water Resistant Grease – Tacky The Molykote G-1502FM Synthetic Bearing and Gear Grease is designed to lubricate mechanical equipment operating under heavy water exposure. The Molykote G-1502 FM grease which is both water resistant and corrosion resistant is suited for open gears grease lubrication and water spray-off grease lubrication. Moreover many food and beverage companies have been using effectively the Molykote G-1502FM for their machine bearing food grade grease lubrication,which is meeting FDA regulation 21 CFR 178.3570 for their processes with minor food contact.
The primary concern of most manufacturing plants is to keep its equipment operating at a highest possible efficiency level and at a lowest maintenance cost. One of the biggest factors that brings down machine efficiency is the inappropriate lubricant usage which resulted to frequent machine breakdown; thus, requiring unplanned repair. This wrong use of lubrication happened generally in a difficult and unusual operating condition, such as running a machine in a watery environment.
Perhaps many of you may not be aware of an appropriate and lasting solution because you were not furnished with the information of the availability of the product that may be of help to you. However today,Dow Corning which specializes in silicone and silicone-based technology introduces the tenaciously tacky Molykote G1502FM Synthetic Bearing and Gear Grease that will answer your problems in a water-rich environment operation.
In the corrosion prevention aspect, a comparative study of bearings was done with the leading competing brands. The result showed an amazing reality that only 5% of the area of the outer bearing race lubricated with Molykote G-1502FM indicated evidence of corrosion, while the bearing lubricated with the grease of the competitors showed about 100% presence of corrosion. For getting the best result you may seek the assistance of Dow Corning’s local distributor.
Another problem which plagued the operation of machines in a highly excessive water exposure is the wear resistance and water spray-off. A study was conducted on the ten leading grease brands including Molykote G-1502FM on water spray-off and wear resistance.
The result revealed that only Molykote G-1502 FM Synthetic Bearing and Grease exhibited a grease loss of 23.7% while on the other 9 leading brands had grease loss reaching to a high of 91.3%. Moreover Molykote G-1502 FM showed its ability to bring down to a minimum the wear scar as compared to the competitors. This result indicated that the Molykote G-1502 FM grease remains intact over a longer period of time; thus, showing a proof of an increased machine life. To fully appreciate these benefits you may contact your nearest Dow Corning local distributor.
- NSF H1 approved. Meets FDA
regulation 21 CFR 178.3570 for
incidental food contact applications
- Excellent adhesion and resistance
to water wash-out and spray offNLGI #2.5 white grease
- Fully synthetic base oil
- NLGI #2.5 white grease
- Provides good compatibility with
most industrial and engineering
substrates including many plastic
and rubber materials
- Formulated to provide higher
oxidation resistance, corrosion
protection, load carrying capability
and longer service life than
- Wide service temperature range
- ISO 220 100% Polyalphaolephin
(PAO) base oil
- Aluminum complex thickener
- Fortified with carefully formulated
synergistic combination of
For more information view the Molykote G-1502 FM Technical Data Sheet. Molykote G-1502FM TDS.pdf
Dow Corning has additional safety data that can be found on their website: Molykote G-1502fm Material Safety Data Sheet MSDS.pdf
For additional information regarding the Dow Corning Molykote G-1502FM “Tacky” including sizes, packaging and dispensing you should seek the assistance of our technical experts.
Buy Molykote G-1502FM Synthetic Bearing and Gear Grease for your mechanical equipment