Buy Loctite 9396
Loctite 9396 is a room temperature curing, low viscosity, two component epoxy paste adhesive. It provides high strengths at both high and low temperatures from -55 to 177 degrees Celsius. 100 gram mass of this innovative material will have a pot life of 120 minutes at 25 degrees Celsius. The product is qualified to MMM-A-132, Rev A, Type 1, Class 3. The mix ratio will be 100 of part A by weight to 30 of part B by weight.
The color of Part A is blue and the color of Part B is purple, once properly mixed together the material will turn into a green to dark purple color. Loctite ea 9396 mixed will have a viscosity 35 poise at 75 degrees Celsius. The tensile strength is 8,000 psi at 25 degrees Celsius and the tensile modulus is 400,000 psi. Handling strength will occur in 24 hours at 25 degrees Celsius once the material is applied. It will take approximately 3 to 5 days at 25 degrees Celsius to achieve the normal performance and to be fully cured. If time is an issue, Loctite 9396 can be accelerated cured for one hour at 66 degrees Celsius.
When applying Loctite 9396, it is important to properly clean and dry all surfaces. Dirt, dust and excessive debris need to be removed for optimal bonding. When mixing the two components together it is very important to not mix a quantity of more than 450 grams because of dangerous heat buildup may occur causing uncontrolled decomposition of the adhesive. When application of Loctite ea9396 is completed cleanup is important to remove any excessive adhesive from tools and the equipment before it hardens.
As with any sort of chemicals, it is strongly recommended to understand the proper application methods and handling precautions when dealing with Loctite ea 9396. If stored between 4 and 25 degrees Celsius, the shelf life of Loctite 9396 is 1 year. When mixing and applying this advanced material, adequate ventilation is needed. Avoiding contact with the skin and eyes as well as avoid breathing the vapors emitted by this product. Do not use this product until you have read the full details on the Loctite 9396 MSDS.
Loctite 9396 is an cutting-edge epoxy paste that is formulated for structural bonding. Loctite is acknowledged worldwide for formulating state-of-the-art products for a wide range of industries. Loctite EA 9396 is specifically designed for potting, filling and liquid shim applications. For questions involving the application methods or the different sizing available, contact Krayden, Inc., an authorized distributor of Henkel adhesives, sealants, solder and specialty chemicals. More information on this advanced product can be found on the Loctite 9396 TDS. This product was formerly known as Hysol EA 9396.
