DOWSIL1-4174, formerly Dow Corning 1-4174, is a single component, flowable, gray, thermally conductive adhesive with high tensile strength, and no added solvents. The innovative silicone adhesive comes with 7 mil glass beads (178 micron) allowing for uniform, and easily controlled bond line thickness. DOWSIL1-4174 is the same product as DOWSIL1-4173, but DOWSIL1-4174 includes the 7 mil glass beads. The rapid cure process controlled by temperature, and it will flow, fill, or self-level after dispensing. A key focus of this silicone material is to allow more significant miniaturization, and more reliable power module performance by removing heat.
DOWSIL 1-4174 Gray Thermally Conductive Adhesive Products
Buy Now:
DOWSIL 1-4174 Thermally Conductive Adhesive Gray 30 ML Syringe
DOWSIL 1-4174 Thermally Conductive Adhesive Gray 1.5 KG Cartridge
DOWSIL 1-4174 Thermally Conductive Adhesive Gray 10 KG Pail
The composition of DOWSIL1-4174 thermally conductive adhesive is a ceramic filler and silicone polymer. It is suitable for bonding integrated circuit substrates, base plate attach, heat sink attach, adhering lids and housings. Viscosity is 62,300 cP, specific gravity uncured is 2.71. Cure time for DOWSIL1-4174 at 150°C is 20 minutes. At 125°C, it will take 30 minutes to cure and at 100°C 90 minutes. Dielectric constant at 1200 Hz is 5.62, and thermal conductivity is 1.78 W/Mk. It meets the UL Flammability Classification UL 94-V0. For more technical information in regards to the product, ask an expert now.
DOWSIL1-4174 Gray produces no by-products during the curing process. This allows the product to be well suited for applications that have deep sections and complete confinement. Substrates excellent for bonding with this silicone include epoxy laminate boards, metals, ceramics, reactive metals, and filled plastics. DOWSIL1-4174 Adhesive will draw out heat, leaving in performance and reliability. To know the maximum bond strength of the adhesive on certain substrates, 100 percent cohesive failure in a lap shear or similar strength test is required. Find more information on the DOWSIL1-4174 Technical Data Sheet.
DOWSIL 1-4174 Adhesive Typical Properties:
Specific gravity
Durometer Shore A
Dielectric Strength
Dielectric Constant at 100 Hz
Thermal Conductivity
UL Flammability Classification
Dissipation Factor at 100 kHz
Unprimed Adhesion – Lap Shear (Al)
2.71
92
400 volts/min
5.62
1.78 W/mK
UL 94 – V0
0.0021
646 psi
Before using the product, it is highly recommended to read and fully understand the safety information required from the DOWSIL1-4174 SDS. The Material is not resistant to long periods of solvent exposure. Temperature range the silicone is operational is between -45 to 200°C for long periods of time. Anything above or below the stated temperatures may cause the performance and behavior of the product will be altered. Usable storage and shelf life is listed on the product. DOWSIL1-4174 should be stored in its original package, tightly sealed avoiding any contamination.DOWSIL1-4174 is stable over various operating conditions and environments. This one-part, gray, thermally conductive, flowable adhesive will help reduce the amount of heat flowing to electronic components and can increase reliability.
DOWSIL thermally conductive materials are suitable for automotive, lighting, and industrial applications to draw out heat, leaving in performance and reliability. DOWSIL 1-4174 adhesive is a single component, gray, thermally conductive material that provides stress relief from the thermal effect on electronic components. More technical information can be attained by contacting Krayden, a certified technical distributor of Dow silicone.